Description

Envirolube Extreme TCLP-Safe Open Gear Lubricant

When it comes to protecting heavily loaded open gears, Whitmore’s Envirolube has been recognized by OEMs and end-users alike as the product that gets the job done.

In 2012 Whitmore introduced a further improvement. A special blend of new anti-wear chemistry was added. The resulting product has been named Envirolube Extreme. Nothing has been taken away from the original Envirolube. The synergy created by the Extreme additive system reduces friction and wear to levels that were never thought possible. Friction reduction: 28.1%. Wear reduction: 28.5%.

When Envirolube Extreme is used, new gears (and even damaged gears) are smoothed through a combination of chemical polishing and compression caused by high load. This process is often called “Planishing”. There is no need for special running-in products.

Ideally, Envirolube Extreme should be sprayed intermittently onto the gears. This allows for partial evaporation of the solvent, resulting in a dramatic increase in the viscosity of the lubricant on the gears. For large, heavily loaded Ball Mill gears a lubrication frequency of 15 to 20 minutes is normal.

Benefits of Envirolube Extreme TCLP-Safe Open Gear Lubricant

• WEAR PROTECTION – extends gear life.
• SURFACE SMOOTHING – The addition of the “Envirolube Extreme” additive combination multiplies the smoothing effect that has been witnessed for many years by customers who used Envirolube. Smoother surfaces spread the load, thus preventing wear. The need for special running-in compounds is eliminated.
• RUST PROTECTION – protects against rust and corrosion.
• TCLP-Safe – passes the EPA Toxicity Characteristic Leaching Procedure. The spent product is not considered a “characteristic hazardous waste”.

Applications of Envirolube Extreme TCLP-Safe Open Gear Lubricant

Envirolube Extreme meets or exceeds the requirements of major OEM’s for open gear lubricants.

Use Medium grade on unheated mills in weather conditions between 0°F (-18°C) and 110°F (43°C). Use Heavy grade on heated mills up to 220°F (105°C) or where gears are badly worn.

All grades are suitable for use in airless spray systems. Do not use with NBR rubber seals. Viton is recommended.

Documents:

Envirolube Extreme TCLP-Safe Lubricant – TDS >>

Envirolube Extreme TCLP-Safe Lubricant – SDS >>