ROYCO 717 Power Transmission Fluid 5 Gallon Pail
Royco 717 is packaged in 5 gallon pail and 55 gallon drum containers.
Description
ROYCO 717 Power Transmission Fluid 5 Gallon Pail
ROYCO 717 is a pale straw – colored hydraulic fluid blended with highly refined mineral base oils and modern additive technology to provide protection against rust, wear, demulsibility, and to afford greatly improved viscosity – temperature characteristics as well as enhanced oxidation – corrosion resistance.
ROYCO 717 is recommended for use in applications requiring a constant source of fluid power to hydraulic components – particularly in naval ordnance equipment. The fluid is suitable for use in hydraulic systems involving mechanical or fibrous type filters or centrifugal purification. It is noncorrosive to bearings and hydraulic systems and does not cause clogging of oil screens or valves. The fluid remains homogeneous over the temperature range of -34oC to 4oC.
Features of ROYCO 717 Power Transmission Fluid
- High Viscosity Index
- Rust and Corrosion Inhibition
- Wide temperature application
- Good Emulsion Stability
- Full power operation under moderate water contamination and high humidity environments
- Non-corrosive to system components; does not form deposits of precipitates which can close fitting components.
Specifications of ROYCO 717 Power Transmission Fluid
Properties | Test Method | ROYCO 717 |
Kinematic Viscosity, cSt @ 100oC | ASTM D445 | 10.65 |
Kinematic Viscosity, cSt @ 40oC | ASTM D445 | 31.25 |
Kinematic Viscosity, cSt @ -20oC | ASTM D44 | 305 |
Kinematic Viscosity, cSt @ -35oC | ASTM D445 | 878 |
Pour Point, oC | ASTM D97 | -51 |
Flash Point, oC | ASTM D92 | 113 |
Fire Point, oC | ASTM D92 | 116 |
Neutralization No., mq KOH/g | ASTM D974 | 0.10 |
Water Content, % | ASTM D95 | 0.05 |
API Gravity, 15.6oC | ASTM D287 | 28.7 |
Color | ASTM D1500 | 1.0 |
Low Temperature Turbidity | spec | Pass |
Rust Prevention | ASTM D665A | Pass |
Corrosion and Oxidation Stability, 72 hrs. @ 93oC Corrosion stability: Cu Wt. loss, mg/cm2 no pitting or etching Oxidation stability: Viscosity change Neutralization number mq/KOH |
spec | Pass Pass Pass 0.17 |
Evaporation, 6 hours, 66oC, % weight loss | ASTM D972 | 5.4 |
Emulsion Stability/ Water Sludging after 24 hours | spec | Pass |
Low Temperature Turbidity, -37oC, 72 hours | spec | Pass |
Additional information
Weight | 41 lbs |
---|---|
Dimensions | 12 × 12 × 14 in |
You must be logged in to post a review.
Reviews
There are no reviews yet.