Molykote G-1502FM Synthetic Bearing & Gear Grease
NLGI Grade 2 – PAO based grease with a base oil viscosity of 220 cSt at 40 C, aluminum complex thickened, uses white solids as solid lubricants. Also H1 certified through NSF for incidental food contact.
Description
Synthetic Bearing & Gear Grease.
Key Properties
NLGI Grade 2 – PAO based grease with a base oil viscosity of 220 cSt at 40 C, aluminum complex thickened, uses white solids as solid lubricants. Also H1 certified through NSF for incidental food contact.
Applications
Suitable for applications where tacky grease is preferred or required such as chains, cams, open gears, valves and sprockets where water wash off is problematic or grease sling-off cannot be tolerated.
Features & Benefits
- NSF H1 approved. Meets FDA regulation 21 CFR 178.3570 for incidental food contact applications.
- NLGI# 2-3 white grease.
- Fully synthetic base oil.
- Excellent adhesion and resistance to water wash-out and spray off.
- Wide service temperature range.
- Formulated to provide higher oxidation resistance, corrosion protection, load carrying capability and longer service life than conventional lubricants.
- Provides good compatibility with most industrial and engineering substrates including many plastic and rubber materials.
Composition
• Aluminum complex thickener
• ISO 220 100% Polyalphaolephin (PAO) base oil
• Fortified with carefully formulated synergistic combination of lubricating solids
Product Details
Product Type: Grease
Chemistry: Polyalphaolefin (PAO)
Base Oil Viscosity: 220 @ 40°C
NLGI Grade: 2
Thickener: Aluminum Complex
Solid Lubricant: White Solids
High Temp: 149°C
Low Temp: -40°C
Color: white
How To Use
Apply Molykote® G-1502 FM Synthetic Bearing & Gear Grease using conventional grease application methods, i.e., clean brush, and manual or automated dispensing equipment.
You must be logged in to post a review.
Reviews
There are no reviews yet.