Description

EZ Switch Switch Plate Lubricant

Whitmore’s EZ Switch has distinguished itself as a switch plate lubricant that works. It is easy to apply; it forms a protective coating on the switch plate, resists rain, and stops wear. After it is applied, EZ Switch begins to dry on the switch. Operating the switch causes the lubricant to “plate out”. As the switch operates, the coating becomes denser in the contact area. This enhances wear protection.

How To Apply EZ Switch Switch Plate Lubricant

Whitmore’s EZ Switch can be used on all types of railroad switches, both manual and electric. It can be applied by pouring, brushing, or spraying. Completely cover the switch with the thinnest layer possible.
RAIN Condition Application:
EZ Switch can be applied to wet switches, and it won’t wash off in the rain. As EZ Switch dries, it becomes even more resistant to rain.
FREQUENCY OF LUBRICATION:
With EZ Switch, a switch that operates twice as often does not need lubrication twice as often. Because of varying climates and operating conditions, it is impossible to give a hard-and-fast
lubrication frequency.
 A good place to start is to lubricate all switches and revisit them after a week.
 Those that operate often or are subject to difficult conditions may need relubrication after one week.
 In extreme cases, more than once a week may be needed.
 In most cases, switches that are used less often will require lubrication cycles that are longer than a week.
 Most operators consider once a month as the longest interval for infrequently used switches

Benefits of EZ Switch Switch Plate Lubricant

• REDUCES FRICTION AND WEAR – low coefficient of friction facilitates ease of switch operation. This minimizes effort and risk of injury on manual switches.
• LONG LASTING PROTECTION – less frequent reapplication saves time and lowers consumption.
• OPERATING RANGE – can be used at temperatures as low as -60°F (-51°C). One grade is suitable for year-round use.
• EASY TO APPLY – it can be poured, brushed, or sprayed.
• RESISTS CONTAMINANTS – does not attract dirt.

Application of  EZ Switch Switch Plate Lubricant

EZ Switch is formulated primarily for use on railroad switch plates (railway slide chairs). It can also be used on wire ropes. Because it is high in graphite, it is suitable for use in high temperature applications (>600°F, or >315°C) where the fluid components will evaporate or burn off and leave a dry graphite lubricant.

Documents:

EZ-Switch Lubricant- >>

EZ Switch Lubricant – MSDS >>