Description

Car Engine oil pump 24V and 12V electric Oil/Diesel Fluid Sump Extractor Scavenge Exchange fuel Transfer suction Pump,Boat Motorbike

• Pressure: Low Pressure
• Standard or Nonstandard: Standard
• Power: Electric
• Brand Name: CREATORELE
• Theory: Electromagnetic Pump
• Usage: Oil
• Model Number: bc1017.
• Fuel: 12V24V
• Application: Diesel
• Structure: gear pump
• type: gear pump
• performance: Non blocking
• uses: Flow pump
• Delivery medium: Oil pump
• Pump shaft position: horizontal
• flow: 250L/ hours (m3/h)
• lift: 1 (m)
• speed: 2500 (RPM)
• Suction diameter: 1 (mm)
• Discharge aperture: 1. (mm)

12V electric pump pump suction pump self-priming pump diesel oil, engine oil pump

Voltage: DC 12V or 24V

Maximum power: 60W

Diesel: about 250L/ hours

Oil (40 degrees ~60 degrees): about 1L/ minutes

Wire length: 2.5 meters (car battery) or cigarette lighter power supply

Oil inlet hose length: length 1.2M, Outer diameter  6MM  interior diameter 4MM

oil length 1.5M, Outer diameter 12MM       interior diameter 10MM.

The engine oil is the blood that keeps the engine alive. It is the component that can cool and lubricate the engine. Now, more and more owners to recognize the importance of oil, but most of the owners to replace the oil are in the auto 4S shop, 4S shop to sell your oil does not say, perhaps there are other kinds of tricky, and also charge expensive labor costs oh!

The factory is the pump, in order to all owners can own car to replace the oil and developed products, their own replacement vehicle oil not only save money, but also very convenient! And when the baby oil change, there is no need to put the oil drill into the underbody, directly from the oil waste oil can be pumped out of the foot, then put the new oil through oil pump in operation is simple and convenient! For most models!

Accessories:

1.Wire length: 2.5 meters (car battery) or cigarette lighter power supply

2 oil inlet pipe length 1.2M, Outer diameter 6MM interior diameter 4MM

3 oil length 1.5M, Outer  diameter 12MM interior diameter 10MM

4.2 clamps