Description

LPS® corrosion inhibitor provides 99+% heat-resistant zinc rich galvanized coating for metal protection. The tough, flexible layer resists chalking, yellowing, cracking or peeling. This inhibitor acts as a hot-dip galvanizing agent that electrochemically protects ferrous metals at both indoors and outdoors. This liquid inhibitor is light gray in color and comes in a 14-ounce can. This inhibitor has 0.76 MIR VOC contents that evaporate slowly without leaving any residues or stains. It takes 6 hours for curing and 3 to 5 minutes for drying. The corrosion inhibitor has a vapor pressure of greater than 1 kPa at 25 degrees C, boiling temperature rating of 133 degrees F and a specific gravity of 1.76 at 25 degrees C. This aromatic hydrocarbon odored inhibitor has a flash point of less than 73.4 degrees F, making it safe for use. It withstands temperature range of -40 to 750 degrees F. The corrosion inhibitor withstands a water temperature up to 212 degrees F and continuous dry heat up to 750 degrees F. It is ideal for air conditioning parts, antennas, bridges, chain link fences, docks, ducts, heating parts, machine housing and material handling equipment.

Benefits:

• Suitable for use as a paint primer
• Use as a flash rust preventive on welded areas
• Ideal for newly welded surfaces, rusted surface, galvanized surface, off-shore rigs, outside storage tanks, pipes, plumbing, structural steel, tanks, transmission toners, pulley and chain cover

Applications:

• Air conditioning parts
• Chain link fences
• Ducts
• Heating parts
• Machine housing
• Material handling equipment
• Newly welded surfaces
• Outside storage tanks

Specification :

• Country of origin – United States
• ECCN / USML – EAR99
• Schedule B – 3403990000
• Dimensions (L x W x H) – 2.63 x 2.63 x 8.13 IN
• Shelf Life (in days) – 365
• Package Weight – 1.08 LB
  
• FAA Approval Code – N/A
• Hazmat(Y/N) – Y