Molykote® 3400A Anti-friction Coating, LF
A heat cured anti-friction coating filled with molydenum disulfide and and antimony trioxide.
Description
Heat-curing dry lubricant.
Key Properties
A heat cured anti-friction coating filled with molydenum disulfide and and antimony trioxide.
Applications
Sliding contacts of metal/metal combinations with slow to moderate fast movements and high loads; Used successfully in automotive applications such as: pins, springs and bearings surfaces in brakes, body hinges and linkages; Moving parts in locks, switches, ventilation controls and servo mechanisms; Under the hood linkages exposed to dust, moisture, fuels, oils and other contaminants; Hinge pins, sleeve bearings and cams; Servo mechanism and instrument bearing; Threaded connections and fasteners
Features & Benefits
Excellent lubrication; Excellent corrosion protection; Good solvent resistance; High load-carrying capacity; Excellent adhesion to metal; Low coefficient of friction; High resistance to oil and fuels.
Product Details
Product Type: Anti-Friction Coating
Chemistry: Organic Binder
Solid Lubricant: MoS2
Cure Temp: 200°C
High Temp: 315°C
Low Temp: -200°C
Color: Gray
How To Use
Carefully degrease friction surfaces with solvent and allow solvent to evaporate completely. Stir Molykote 3400A Anti-friction Coating, LF thoroughly and apply by spraying, dipping, painting or centrifuging (Recommended thinner: Molykote L13 Thinner). The friction surfaces should be coated as evenly and thinly as possible. Average recommended coating thickness for typical applications is 10-15μm. Typical curing conditions are: 30 minutes at
200°C (392°F).
You must be logged in to post a review.
Reviews
There are no reviews yet.