Molykote 3402-C LF Anti-Friction Coating
An air cured anti-friction coating filled with molybdenum disulfide and antimony trioxide.
Description
Air dry or heat cure coating for high loads ans with low electrical conductivity properties.
Key Properties
An air cured anti-friction coating filled with molybdenum disulfide and antimony trioxide.
Applications
Excellent combination of corrosion protection and lubrication; Used on main axle threads of drill hammers, spindles.
Features & Benefits
- Good corrosion protection;
- Excellent lubricity; Air-curing;
- High load-carrying capacity and wear resistance.
COMPOSITION
- Solid lubricants
- Organic binder
- Organic solvents
Product Details
Product Type: Anti-Friction Coating
Chemistry:Organic Binder
Solid Lubricant: MoS2
Cure Temp: 20°C
High Temp: 315°C
Low Temp: -200°C
Color: Gray
HOW TO USE
Surface preparation
Carefully clean and degrease surfaces to be coated with the Anti-Friction Coating. Recommended pretreatments:
blasting or phosphating. Both pretreatments increase the adhesion and service life of the Anti-Friction Coating.
How to apply
Stir the Anti-Friction Coating thoroughly before and during use, apply by spraying, dipping, centrifuging or brushing. Surfaces should be coated as evenly as possible. Recommended dry film thickness: 5 to 20 μm.
You must be logged in to post a review.
Reviews
There are no reviews yet.