Molykote D-7409 Anti-Friction Coating
A heat cured anti-friction coating filled with molydenum disulfide and graphite, higher load carrying capability due to resin selection.
Description
Heat-curing dry lubricant.
Key Properties
A heat cured anti-friction coating filled with molydenum disulfide and graphite, higher load carrying capability due to resin selection.
Applications
Sliding contacts of metal/metal combinations with slow to moderate fast movements and moderate to high loads; Suitable for oscillating movements or intermittent operations. For improving the running-in process, for permanent lubrication at high temperatures and also where oils and greases cannot be used; Used successfully for piston rings and tappets of combustion engines, magnetic armatures of vehicle starter motors, parts of vehicle brakes, locks, hinges and pumps, Corrosion protector for hydraulic and pneumatic parts.
Features & Benefits
- Outstanding lubrication, coupled with corrosion protection properties.
- High load carrying capacity.
- High wear resistance.
- High temperature resistance.
- Resistant to oil, grease, solvents.
- Avoidance of fretting corrosion.
COMPOSITION
- Solid lubricants
- Organic binder
- Organic solvents
Product Details
Product Type: Anti-Friction Coating
Chemistry: Organic Binder
Solid Lubricant: MoS2, graphite
High Temp: 300°C
Low Temp: -70°C
Color: Black
HOW TO USE
Surface preparation
Carefully clean and degrease the surface which will be coated with the Anti-Friction Coating. Recommended pre-treatments: phosphating or sandblasting (180 grid); both pre-treatments increase the adhesion and service life of the
Anti-Friction Coating.
How to apply
Stir the Anti-Friction Coating thoroughly before and during use, apply by spraying (air pressure 3 to 5 bar [45 to 75 psi]), dipping, centrifuging or brushing. Surfaces should be coated as evenly as possible. Recommended dry film
thickness: 5 to 20 μm.
Coverage
When applied at a 10 μm dry film thickness Molykote® D-7409 Anti-Friction Coating has a coverage of appox. 16 m2/kg (this value does not take into account the losses generated during the application process).
You must be logged in to post a review.
Reviews
There are no reviews yet.