Home>Solvay Solexis>Galden LS/HS>Galden HS-260 Vapor Phase Fluid 15.43lb (7kg) Container (1.0447gal)
Galden HS-260 PFPE Vapour Phase Fluid

Galden HS-260 Vapor Phase Fluid 15.43lb (7kg) Container (1.0447gal)

Superseded by Galden HS-260 in 5kg / 2.7322L containers

View Replacement >>>

SKU: GALDENHS260-7KG Category: Tag:
Solvay

Description

Galden HS-260 Vapor Phase Fluid 15.43lb (7kg) Container (1.0447gal)

Galden HS-260 is a line of fully fluorinated fluids specifically designed for Vapor Phase Soldering process. The narrow molecular weight distribution as well as the very strong carbon-fluorine bond and the flexible ether link provide the properties which make Galden HS-260 ideal for use in Vapor Phase Soldering.

Features of Galden HS-260 Vapor Phase Soldering Fluid

  • Wide choice of grades with different boiling point
  • Narrow molecular weight distribution
  • No flash or fire points
  • No auto ignition point
  • No explosion hazards
  • Excellent thermal and chemical stability
  • Good compatibility with materials
  • Low heat of vaporization
  • Vapor density greater than air

Benefits of Galden HS-260 Vapor Phase Fluid

  • Widest operating temperature range to optimize VPS process
  • Maximum process stability and repeatability
  • No boiling point drift
  • Rapid and residue free drying
  • Pre-heating and heating processes take place in an inert atmosphere
  • No corrosion or reaction with materials of construction
  • No formation of decomposition Residues
  • Enhanced safety
  • Safe to use at high temperature

Lead Free and Vapor Phase Soldering Fluid

After years of discussion and debate, EU directives on the Restriction of certain Hazardous Substances (RoHS) is in force across all 25 EU member states, together with Iceland, Lichtenstein and Norway. RoHS is also known as “lead free” but this law deals with other five substances as well:

  • Lead
  • Mercury
  • Cadmium
  • Hexavalent Chromium
  • Polybrominated biphenyls (PBBs)
  • Polybrominated diphenyl ethers (PBDEs)
Based on this legislation, effective from July 1st 2006, products using the above mentioned substances cannot be sold in Europe. Particular emphasis is being placed on lead; lead is a concern when released to the environment as it can cause damage to the human body, it can also accumulate in the environment and has acute and chronic effects on plants, animals and micro-organism.
Because of RoHS, manufacturers of electronic equipment will have to produce and deliver lead-free equipment in Europe; one of the first evidence of this has been the development of lead free printed circuit boards (PBCs).
Solder traditionally used ~ 60% of tin (Sn) and ~ 40% of lead (Pb), now alternative solder materials have been studied, the most common replacements for lead are silver (Ag), Copper (Cu) and Bismuth (Bi). These alternative materials, however, bring a main challenge: higher melting temperature. Traditional tin/lead solders melt at ~ 180°C while lead free solder melts at ~227°C, soldering temperatures are, as well as, heating issues are ongoing concerns for PCBs assemblers.

Galden LS and HS Vapor Phase Fluid

Galden LS and HS grades and Vapor Phase Soldering offers the right solution to lead free process…

  • Galden LS and HS fluids are RoHS compliant and are allowed to be sold in Europe
  • Galden LS and HS fluids offer the widest temperature range to lead free solders up to 260°C
  • Galden LS and HS fluids precise vapors temperature eliminates overheating

Properties of Galden LS/HS Vapor Phase Soldering Fluids

Property Units LS200 LS215 LS230 HS240 HS260
Normal boiling point °C 200 215 230 240 260
Density @ 25°C g/cm3 1.79 1.80 1.82 1.82 1.83
Kinematic viscosity
@ 25°C		 cSt 2.50 3.80 4.40 5.30 7.00
Vapor pressure
@ 25°C		 torr 21 12 3.4 1 1
Specific heat
@ 25°C		 J/Kg°C 973 973 973 973 973
Heat of vap. @ BPT J/g 63 63 63 63 63
Thermal conductivity W/m°C 0.07 0.07 0.07 0.07 0.07
Coefficient of expansion cm3/cm3°C 0.0011 0.0011 0.0011 0.0011 0.0011
Surface tension dyne/cm 19 20 20 20 20
Dielectric strength kV (2.54 mm gap) 40 40 40 40 40
Dielectric constant   2.1 2.1 2.1 2.1 2.1
Volume resistivity Ohm-cm 5*1015 5*1015 5*1015 5*1015 5*1015
Average molecular weight a.m.u. 870 950 1,020 1,085 1,210

Self Life

It is strongly recommend using all fluids and greases at the time of receipt, however when storage is necessary, rotate older stock into use first and observe the recommended parameters listed below.Shelf Life

Galden Fluids Shelf life

Galden Fluids have a guaranteed shelf life of a minimum of 5 years from date of shipment if stored in the original sealed container at ambient temperatures.

Download Material Safety Data Sheet below

Galden LS-HS Vapor Phase Soldering Fluids >>

Additional information

Weight 17 lbs
Dimensions 10 × 9 × 10 in

Brand

Solvay

Reviews

There are no reviews yet.

Be the first to review “Galden HS-260 Vapor Phase Fluid 15.43lb (7kg) Container (1.0447gal)”

Related products