Anderol 3046 Synthetic Compressor Oil 55 Gallon Drum
Anderol 3046 is packaged in 5 gallon pail and 55 gallon drum containers.
Description
Anderol 3046 Synthetic Compressor Oil 55 Gallon Drum
Anderol 3046 is an ISO 46 compressor lubricant formulated from synthetic base fluid utilizing synthetic hydrocarbon (PAO) with specially developed additive systems.
Anderol 3046 is rated H2 for use in food processing plant applications.
Applications of Anderol 3046 Synthetic Compressor Oil
• Oil flooded rotary screw compressors
• Oil flooded rotary vane compressors
• ANDEROL 3046 may also be considered for other applications requiring an oxidation resistant lubricant.
Nominal operating Range is -30°C to 205°C (-20°F to 400°F).
Approvals of Anderol 3046 Synthetic Compressor Oil
ANDEROL synthetic lubricants are field tested, approved or recommended by most major compressor manufacturers. Should you have any questions regarding the suitability of ANDEROL 3046 compressor lubricant for a specific manufacturer’s model compressor, please check with your ANDEROL lubricant supplier or contact Anderol Company.
Intended Use of Anderol 3046 Synthetic Compressor Oil
Anderol 3046 synthetic hydrocarbon based lubricants are similar to mineral oils in their compatibility with paints, seals, gaskets and hoses. No special precautions related to compatibility are required when changing over from a mineral oil lubricant to an ANDEROL synthetic hydrocarbon based lubricant.
Advantages of Anderol 3046 Synthetic Compressor Oil
- Lower oil consumption
- Reduces lacquering and desposits
- Fewer oil changes
- Compatibility with compressor seals, gaskets, hoses, and air system components
- Reduces compressor maintenance
- Greatly reduces fire and explosion hazard
- Lower operating cost
- Consolodation of compressor fluids, reduced inventory
Specifications of Anderol 3046 Synthetic Compressor Oil
| Properties | Test Method | Anderol 3046 |
| Viscosity, cSt @ 40oC | ASTM D 445 | 42 |
| Viscosity, cSt @ 100oC | ASTM D 445 | 7.1 |
| Viscosity Index | ASTM D 2270 | 130 |
| Pour Point, oC | ASTM D 97 | -44 |
| Flash Point, COC, oC | ASTM D 92 | 269 |
| Specific Gravity, 15.6oC (60oF) | ASTM D 4052B | 0.865 |
| Copper Strip Corrosion, 3 hrs @ 100oC | ASTM D 130 | 1B |
| Evaporation, 22 hrs @ 99oC (210oF), % loss | ASTM D 972 | <1.0 |
| Four-Ball Wear, 1200 rpm, 167oF (75oC), 40kg, 1 hour, mm | ASTM D 4172 | 0.7 |
| Ferrous corrosion | ASTM D 665 B | Pass |
| Foam, Sequence I, mL initial/mL final | ASTM D 892 | NiL |
| Demulsibility @ 54oC, mL oil/water/emulsion (min) | ASTM D 1401 | 42/38/0 (<30) |
Documents:
Additional information
| Weight | 467 lbs |
|---|---|
| Dimensions | 23 × 23 × 36 in |
You must be logged in to post a review.
Reviews
There are no reviews yet.