Description

Royco 880 Synthetic Compressor Lubricant 55 Gallon Drum

Royco 880 is a synthetic-based lubricant formulated for use in hyper-compressors and natural gas reinjection applications. It features higher film strength than traditional lubricants, protects against corrosion, is fully
compatible with most compressor components, and minimizes the effect of H2S concentrations in sour gas.

ROYCO 880 contains no animal fats or saponifiable products that interfere with well-bore treatment products.

Intended Use of Royco 880 Synthetic Compressor Lubricant

• Royco 880 is intended for the cylinder lubrication of hyper-compressors and in natural gas reinjection applications.
• Royco 880 may also be used as a cylinder lubricant for reciprocating compressors processing natural gas, carbon dioxide and other gases that require chemical resistance in an ISO 200 viscosity grade.

Advantage Royco 880 Synthetic Compressor Lubricant

Resists wash off by hydrocarbon gases and liquids
Resists absorption into the gas phase and carry-over of the lubricant downstream
Minimizes dilution effects due to insolubility of the lubricant with hydrocarbons
Higher film-strength that traditional lubricants
Protects against corrosion
Fully compatible with most compressor component materials, including: seals, gaskets, hoses, etc.

COMPATIBILITY

Recommended: Acetone, Alcohol, Asbestos, Butyl Dioxtol, Chlorinated Solvents, Glycol Ether, Neoprene, Epoxy Paint, Silicone Rubber, Toluene, Torlon (AMOCO), Vespal (Chemours), and Viton (Chemours).
Questionable: Ethylene Glycol, Triethanolamine, and Water.
Not Recommended: Gasoline, Glycerol, Heptane, Kerosene, Leather, Methanol, and Oil-based paint.

Documents:

PDS – Royco 880 >>